Wave Resin - 1:1 - 2lt

SKU ABR112lt
Out of stock
Product Details

Designed specifically for creating waves, this resin will help you achieve amazing waves that not only cell up wonderfully but also allow for more controlled movement of your resin.

·High Gloss
·Resistant to temperature up to 80°
·Maximum pour depth of 5mm
·45m Working Time
·Initial Cure 12hrs
·Full Cure 3 days
·1.1 mixture
·Measure by volume
·Made in Australia
·High Viscosity
·Crystal Clear
·Excellent UV Resistance
Check out our facebook for live videos on how to use our Wave Resin.
Make sure you order our ABR Wave White Paste and Wave White Acrylic Additive here.
Room temperature should be maintained at 25 degrees. Humidity should be between 50%-85%. Working time, cure time and pour depth varies depending on product type and ratio.
This product has been manufactured in Brisbane, Australia with Australian and overseas ingredients.
WARNING: This product contains chemicals that are harmful to swallow. Use in a well ventilated area that is dust free. Ensure you wear protective clothing, safety glasses, gloves and/or any other necessary PPE. If eye contact is made flush eye immediately with water and seek medical advise. Please consult the MSDS/ TDS at australianbeachresin.com.au.
DISCLAIMER: As individual conditions vary for each application and use of this product, no warranty is expressed or implied with regards to the use of this product, or that such use will not infringe on any patents. Any information provided is furnished with the express condition that tests will be completed by the user to determine the suitability of this product for the use you intended.
Save this product for later