Top Coat Resin - 2:1 - 3lt

In stock
Product Details
Australian Beach Top Coat is used as a final coat on river tables, coasters, jewellery, serving boards, bookmarks and the like. It can also be used to create coasters, jewellery and art work providing the depth of each pour does not exceed 5mm.
·High Gloss
·Resistant to temperature up to 80°
·Maximum pour depth of 5mm
·20m Working Time
·Initial Cure 6hrs
·Full Cure 1 day
·2.1 mixture
·Measure by volume
·FDA approved food safe
·Medium Viscosity
·Crystal Clear
·Excellent UV Resistance

It is FDA approved food contact safe meaning you can serve food on the resin however it is not safe for consumption. It has been tested and approved by the FDA meaning you can give your buyers reassurance that it is safe. Always advise your buyers not to cut on resin under any circumstances as it may lead to small amounts of resin being consumed.

Check out our Facebook for live videos
Make sure you order our your consumables here.
Room temperature should be maintained at 25 degrees. Humidity should be between 50%-85%. Working time, cure time and pour depth varies depending on product type and ratio.
WARNING: This product contains chemicals that are harmful to swallow. Use in a well ventilated area that is dust free. Ensure you wear protective clothing, safety glasses, gloves and/or any other necessary PPE. If eye contact is made flush eye immediately with water and seek medical advise. Please consult the MSDS/ TDS at

DISCLAIMER: As individual conditions vary for each application and use of this product, no warranty is expressed or implied with regards to the use of this product, or that such use will not infringe on any patents. Any information provided is furnished with the express condition that tests will be completed by the user to determine the suitability of this product for the use you intended.

Save this product for later