Kustom Grit Polishing Package

SKU 00074
AU$127.40
In stock
1
Product Details

This package comes with everything you need to sand, polish and finish your piece.

  • Kustom Grit Step 1&2
  • 150mm Mesh Sanding Discs in 80g, 120g, 150g, 180g, 240g, 320g, 400g (total 7)
  • 150mm Sanding Discs in 500g, 600g, 800g (total 3)
  • 150mm Sand Foam Pads in 1000g, 2000g, 3000g, 4000g (total 4)
  • 2 x 150mm Buffing Pads
  • 2 x Light Microfibre Cloths
  • 1 x Tack Cloth

In addition to the above all you need is your project and a Sander with internal or external dust extraction.

Details on Kustom Grit Step 1 and 2 are below.

Kustom Grit Step 1 is a superfine abrasive that is rated at 50,000 Grit. It is used in the sanding and polishing process of timber and epoxy products. It is Australian Made and Owned with local ingredients. It is a food safe product and easily applied.

Instructions

*SAND YOUR PIECE TO YOUR DESIRED GRIT. (Good results are achieved at 400 grit, great results are achieved at 2000 grit)

*APPLY PRODUCT TO PIECE USING A MICROFIBRE CLOTH OR BUFFING PAD

*WORK PRODUCT INTO YOUR PIECE WITH A MICROFIBRE CLOTH OR BUFFING PAD

*CLEAN EXCESS PRODUCT OFF WITH A CLEAN MICROFIBRE CLOTH.

*APPLY KUSTOM GRIT STEP 2

Kustom Grit Step 2 is a microfine abrasive that is rated at 100,000 Grit. It is used in the sanding and polishing process of timber and epoxy products. It is Australian Made and Owned with local ingredients. It is a food safe product and easily applied.

Instructions

Following on from Step 1 instructions

*APPLY WITH A MICROFIBRE CLOTH TO YOUR WORK PIECE

*WORK PRODUCT INTO YOUR PIECE WITH A MICROFIBRE CLOTH OR BUFFING PAD

*CLEAN EXCESS PRODUCT OFF WITH A CLEAN MICROFIBRE CLOTH.

Kustom Grit Can be used for Lathe work using a recommend setting of Low with the RPM between 400 to 800.



Save this product for later